Gnouyaro Palla Assima, Antonin Paquet, Jean-Michel Lavoie (2017). Utilization of MSW-Derived Char for Catalytic Reforming of Tars and Light Hydrocarbons...
Iulian-Zoltan Boboescu, Malorie Gélinas, Jean-Baptiste Beigbeder, Jean-Michel Lavoie (2017). A two-steps optimization strategy for 2nd generation ethanol production using softwood...
Leonardo Tricomi, Tommaso Melchiori, David Chiaramonti, Micaël Boulet, Jean-Michel Lavoie (2017). Sensitivity Analysis and Accuracy of a CFD-TFM Approach to Bubbling...
Chérif Brahima Khalil Diop, Jean-Michel Lavoie, Michel A. Huneault (2017). Separation and Reuse of Multilayer Food Packaging in Cellulose Reinforced Polyethylene...
Jennifer Gil-Coba, Stéphane C. Marie-Rose, Jean-Michel Lavoie (2016). Effect of Water Content and Catalysts Acidity in the Products Distribution During...
Jean-Michel Lavoie. (2016). Implementing 2nd generation liquid biofuels in a fossil fuel-dominated market: Making the right choice. Current Opinion in Green...
Emmanuel Eysseric, Xavier Bellerose, Jean-Michel Lavoie, Pedro A. Segura. (2016) Post-column hydrogen–deuterium exchange technique to assist in the identification of...
Chérif Ibrahima Khalil Diop, Jean-Michel Lavoie, Michel A. Huneault (2015). Structural changes of Salix miyabeana cellulose fibres during dilute-acid steam...
Beauchet, R., Monteil-Rivera, F., & Lavoie, J. M. (2012). Conversion of lignin to aromatic-based chemicals (L-chems) and biofuels (L-fuels). Bioresource technology, 121,...
Verdière, K., Panneton, R., Elkoun, S., Lavoie, J. M., & Oddo, R. (2011). Switchgrass-based noise absorbing material: Characterization and modeling. Canadian...
Pilon, G., & Lavoie, J. M. (2011). Characterization of switchgrass char produced in torrefaction and pyrolysis conditions. BioResources, 6(4), 4824-4839.
Lavoie, J. M., Baré, W., & Bilodeau, M. (2011). Depolymerization of steam-treated lignin for the production of green chemicals. Bioresource technology, 102(7),...
Treatment and valorization of municipal solid waste gasification effluent through a combined advanced oxidation–microalgal phytoremediation approach.
Production of fuel additives by direct conversion of softwood bark using a cheap metal salt.
CO2 capture and inorganic carbon assimilation of gaseous fermentation effluents using Parachlorella kessleri microalgae.
Recovery approaches for sulfuric acid from the concentrated acid hydrolysis of lignocellulosic feedstocks: A mini-review
An integrated approach for hemicellulose extraction from forest residue
Condensable and Liquid Compounds from Biomass and Waste Thermal Degradation
Biorefinery Done Right
Conversion of lignocellulosic biomass in biobutanol by a novel thermal process
Utilization of MSW-Derived Char for Catalytic Reforming of Tars and Light Hydrocarbons in the Primary Syngas Produced During Wood Chips and MSW-RDF Air Gasification
Production of fuel additives by direct conversion of softwood bark using a cheap metal salt
Making next-generation biofuels and biocommodities a feasible reality
Ethanol production from residual lignocellulosic fibers generated through the steam treatment of whole sorghum biomass
A simple process for the production of fuel additives using residual lignocellulosic biomass
Conversion of Biogas to Syngas via Catalytic Carbon Dioxide Reforming Reactions: An Overview of Thermodynamic Aspects, Catalytic Design, and Reaction Kinetics
A Comparative Study of Hydroxyapatite‐ and Alumina‐Based Catalysts in Dry Reforming of Methane
Selective Hydrogenation of Carbon Dioxide into Methanol
Renewable antioxidant additive for biodiesel obtained from black liquor
Single-stage extraction of whole sorghum extractives and hemicelluloses followed by their conversion to ethanol
Phytoremediation of bark-hydrolysate fermentation effluents and bioaccumulation of added-value molecules by designed microalgal consortia
Transitioning Towards a Circular Economy in Québec: An Integrated Process for First-, Second- and Third-Generation Ethanol from Sweet Sorghum and Chlorella vulgaris Biomass
Recent Advances in Power-to-X Technology for the Production of Fuels and Chemicals
Thin stillage treatment and co-production of bio-commodities through finely tuned Chlorella vulgaris cultivation
Utilization of Residual Lignocellulosic Residues and CO2 in Canada: The Beginning of a Whole New Era of Opportunity
CFD simulation of a slurry bubble column: Effect of population balance kernels
High-efficiency second generation ethanol from the hemicellulosic fraction of softwood chips mixed with construction and demolition residues
A novel hybrid first and second generation hemicellulosic bioethanol production process through steam treatment of dried sorghum biomass
Effect of temperature in the conversion of methanol to olefins (MTO) using an extruded SAPO-34 catalyst
Is Dry Reforming the solution to reduce Natural Gas Carbon Footprint ?
Toward the cottonization of hemp fibers by steam explosion – Part 1: defibration and morphological characterization
Role of fixed carbon and metal oxides in char during the catalytic conversion of tar from RDF gasification
Two-Step Thermochemical Cellulose Hydrolysis With Partial Neutralization for Glucose Production
Steam explosion of sweet sorghum stems : Optimisation of the production of sugars by response surface methodology combined with the severity factor
Utilization of MSW-Derived Char for Catalytic Reforming of Tars and Light Hydrocarbons in the Primary Syngas produced during Wood Chips and MSW-RDF Air Gasification
CFD Simulations of an Air-Water Bubble Column : Effect of Luo Coalescence Parameter and Breakup Kernels
A two-steps optimization strategy for 2nd generation ethanol production using softwood hemicellulosic hydrolysate as fermentation substrate
Progress and Prospects in the Field of Biomass and Waste to Energy and Added-Value Materials
Sensitivity Analysis and Accuracy of a CFD-TFM Approach to Bubbling Bed Using Pressure Drop Fluctuations
Isolation of Nanocrystalline Cellulose : A Technological Route for Valorizing Recycled Tetra Pak Aseptic Multilayered Food Packaging Wastes
Separation and Reuse of Multilayer Food Packaging in Cellulose Reinforced Polyethylene Composites
Effect of steam treatments on the availability of various families of secondary metabolites extracted from green sweet sorghum
Toward the cottonization of hemp fibers by steam explosion – Part I : defibration and morphological characterization
Catalytic conversion of residual fine char recovered by aqueous scrubbing of syngas from urban biomass gasification
Modeling of ash deposition on the wall of a high temperature slagging gasifier
Effect of Water Content and Catalysts Acidity in the Products Distribution During Propylene Synthesis with a Mixture of DME and Methanol
Surface modification of microcrystalline cellulose (MCC) and its application in LDPE-based composites
Implementing 2nd generation liquid biofuels in a fossil fuel-dominated market: Making the right choice
Post-column hydrogen–deuterium exchange technique to assist in the identification of small organic molecules by mass spectrometry
Structural changes of Salix miyabeana cellulose fibres during dilute-acid steam explosion: Impact of reaction temperature and retention time
Inline Analysis of the Dry Reforming Process through Fourier Transform Infrared Spectroscopy and Use of Nitrogen as an Internal Standard for Online Gas Chromatography Analysis.
Lignin extraction–Reassessment of the severity factor with respect to hydroxide concentration
High yields of sugars via the non-enzymatic hydrolysis of cellulose
A thermodynamic resolution of dimethyl carbonate decarboxylation and the first example of its reversibility: Dimethyl ether carboxylation
Review on dry reforming of methane, a potentially more environmentally-friendly approach to the increasing natural gas exploitation
Pyrolysis of switchgrass (Panicum virgatum L.) at low temperatures in N2 and CO2 environments; a study on chemical composition of chars extracts and bio-oils
UV–Vis as quantification tool for solubilized lignin following a single-shot steam process
Influence of Elevated CO2 and Municipal Wastewater Feed on the Productivity, Morphology, and Chemical Composition of Arthrospira (Spirulina) platensis
Alternative fuel production by catalytic hydroliquefaction of solid municipal wastes, primary sludges and microalgae
Fermentation of C6 carbohydrates from triticale straw hemicellulosic fraction as pretreatment for xylose purification
From first- to third-generation biofuels: Challenges of producing a commodity from a biomass of increasing complexity
Pyrolysis of Switchgrass (Panicum virgatum L.) at Low Temperatures within N2 and CO2 Environments: Product Yield Study
Interaction of CO2/CH4 With steel wool in an electrocatalytic dry reforming reactor
Non-homogeneous residual feedstocks to biofuels and chemicals via the methanol route
Conversion of lignin to aromatic-based chemicals (L-chems) and biofuels (L-fuels)
Conversion of non-homogeneous biomass to ultraclean syngas and catalytic conversion to ethanol
Switchgrass-based noise absorbing material: Characterization and modeling
Characterization of switchgrass char produced in torrefaction and pyrolysis conditions
Depolymerization of steam-treated lignin for the production of green chemicals
Biorefining Lignocellulosic Biomass via the Feedstock Impregnation Rapid and Sequential Steam Treatment
High Yields of Sugars via the Non-Enzymatic Hydrolysis of Cellulose
From biomass-rich residues into fuels and green chemicals via gasification and catalytic synthesis
Biomass char production at low severity conditions under CO2 and N2 environments
Evaluation of the co-product pulp from Salix viminalis energy crops
Production of pulp from Salix viminalis energy crops using the FIRSST process
Quality Pulp from Mixed Softwoods as an Added Value Coproduct of a Biorefinery
Biomass Refineries: Relationships Between Feedstock And Conversion Approach